How to Use a Gas-powered Pole Saw

We all know that cutting down trees is a difficult and time-consuming process, but the alternative is to hire someone else to do it for you. Whether you're looking forward to doing some yard work or not, there's one tool that makes the job much easier - the gas pole saw. 

A gas pole saw is a powerful and effective tool for cutting branches and clearing out brush. The pole extends the range of reach, so it doesn't require you to get up close and personal with any potentially dangerous material. Here I will discuss how to use a gas-powered pole saw so that you don’t make any major mistake while operating the saw.

How to Use a Gas-Powered Pole Saw: 3 Easy Steps

Use a Gas-Powered Pole Saw

Pole saws are a good tool for cutting high up branches. They are also sometimes used to trim tree limbs that have fallen on power lines. Professional gas pole saws are designed with telescoping handles which allow the user to reach tall trees without having to stand on a ladder or lean out of an open window. Let’s see the proper procedure of using this incredible saw. 

1. Choose an Appropriate Day

On a sunny day, you should start sizing your garden trees. Remember that it is not the best time to do this on snowy or rainy days because if the tree's limbs are wet, they will be too slippery for your pole saw!

Remember, the perfect day for cutting is also one that's not extremely hot. Some saws are designed to work under 40 degrees Celsius, so if your one gets any hotter than that, you'll end up with bad results.

2. Adjust The Pole Saw and Your Position

When you’re cutting limbs with a gas saw, adjust the range until it reaches to your desired branch. Get a good grip by holding the pole at its base firmly and turning it vertically to extend outwards for better reach. To make sure you get clean cuts, change positions or aim more precisely if needed when using this tool! 

Moreover, you should check and clean your pole saw before using it. For example, you might want to fill the gas container to ensure that the saw keeps working and don’t stop suddenly. Make sure that all parts are in perfect condition, including the sharp chain. You may experience serious injuries if there's something wrong with any part of this equipment or process. Never treat safety checks lightly!

Also, when you're holding a pole saw firmly, make sure that your feet are planted on the ground. This will give you great control over the cutter while making it easy to manage any branches overhead with minimal effort and stress!

3. Start Cutting 

When you position yourself and adjust the pole's length, strong cuts are needed. Remember, the deeper your strokes, the faster it goes. Also, before cutting down the branches with the gas pole saw, make sure to turn on the device and wait until the powerful cutter reaches its maximum speed. Once it starts rotating at full speed, you can begin the trimming process!

Moreover, it's important not to use the saw on big branches right after turning it on. Instead, you should cut small limbs and gradually move towards larger ones so that you can feel more relaxed and comfortable while dealing with those big branches.   

Also, if something doesn't work out how it should after cutting down a few trees or limbs, you can readjust your positioning and try again! However, if everything goes perfectly, you will find the task super easy. So, keep cutting your desired branches one by one. 


Some Tips to Follow While Using a Gas-Powered Pole Saw

Tips to Follow While Using a Gas-Powered Pole Saw
  • Don't stand underneath the branches that you are cutting off of trees because the branches may fall on you
  • Don't overreach because you could lose your balance
  • Don't try to move too quickly when using a gas pole saw
  • Don't cut more than 25% of the limb off at one time
  • Choose your cuts wisely, if they are too big then you could damage the tree or make it more difficult for it to heal and regrow new branches
  • Cut gently. Don’t push or drag the pole saw to cut quickly

Final Words

Gas-powered Pole saws are a must-have in any serious gardener's tool kit. Pole saws can cut the tallest tree branches easily and quickly without damaging them, but you need to know how to use a gas-powered saw properly so that you and your trees won't get harmed when using this outstanding cutter.

Follow these step-by-step instructions carefully and we guarantee you will be able to successfully master operating your newly bought gas-powered pole saw!

I am Vera Watson. Drawing The House is a dream that was conceived when I saw a niche in consumer guide on almost everything in our homes. My main aim is to help you save money by testing the products you need and recommending you the best of them all. I believe in the family as an institution and the first way to make a family happy is providing the best for them.

Click Here to Leave a Comment Below 0 comments